The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
|Microcontroller ||Atmel ATmega168 or ATmega328 |
|Operating Voltage (logic level) ||5 V |
|Input Voltage (recommended) ||7-12 V |
|Input Voltage (limits) ||6-20 V |
|Digital I/O Pins ||14 (of which 6 provide PWM output) |
|Analog Input Pins ||8 |
|DC Current per I/O Pin ||40 mA |
|Flash Memory ||16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader |
|SRAM ||1 KB (ATmega168) or 2 KB (ATmega328) |
|EEPROM ||512 bytes (ATmega168) or 1 KB (ATmega328) |
|Clock Speed ||16 MHz |
|Dimensions ||0.73" x 1.70" |
If you want to give a closer look to this board we advice you to visit the official Arduino Nano page in the Hardware Section.