Recently Viewed

CAN Bus IC TXRX Single Wire 8 - SOIC

CAN Bus IC TXRX Single Wire 8 - SOIC
  Zoom
Our Price:  £1.20(Inc. 20% VAT)(£1.00 Exc. VAT)Earn 1 Loyalty Points
+

SKU:  PPNCV7356D1GOS-ND
Part Number:  NCV7356D1GOS-ND
Brand:  DigiKey

Stock / Availability

Available Now:  

9 in stock, immediate despatch
Need more than we have? : Supplier out of stock
  (1 Review)

Single Wire CAN Transceiver


The NCV7356 is a physical layer device for a single wire data link
capable of operating with various Carrier Sense Multiple Access
with Collision Resolution (CSMA/CR) protocols such as the Bosch
Controller Area Network (CAN) version 2.0. This serial data link
network is intended for use in applications where high data rate is not
required and a lower data rate can achieve cost reductions in both the
physical media components and in the microprocessor and/or
dedicated logic devices which use the network.
The network shall be able to operate in either the normal data rate
mode or a high−speed data download mode for assembly line and
service data transfer operations. The high−speed mode is only
intended to be operational when the bus is attached to an off−board
service node. This node shall provide temporary bus electrical loads
which facilitate higher speed operation. Such temporary loads should
be removed when not performing download operations.
The bit rate for normal communications is typically 33 kbit/s, for
high−speed transmissions like described above a typical bit rate of
83 kbit/s is recommended. The NCV7356 features undervoltage
lockout, timeout for faulty blocked input signals, output blanking
time in case of bus ringing and a very low sleep mode current.
The device i s compliant with GMW3089V2.4
General Motors Corporation specification.


Features


• Fully Compatible with J2411 Single Wire CAN Specification
• 60A (max) Sleep Mode Current
• Operating Voltage Range 5.0 to 27 V
• Up to 100 kbps High−Speed Transmission Mode
• Up to 40 kbps Bus Speed
• Selective BUS Wake−Up
• Logic Inputs Compatible with 3.3 V and 5 V Supply Systems
• Control Pin for External Voltage Regulators (14 Pin Package Only)
• Standby to Sleep Mode Timeout
• Low RFI Due to Output Wave Shaping
• Fully Integrated Receiver Filter
• Bus Terminals Short−Circuit and Transient Proof
• Loss of Ground Protection
• Protection Against Load Dump, Jump Start
• Thermal Overload and Short Circuit Protection
• ESD Protection of 4.0 kV on CANH Pin (2.0 kV on Any Other Pin)
• Undervoltage Lock Out
• Bus Dominant Timeout Feature
• Internally Fused Leads in SO−14 Package
• NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
• Pb−Free Packages are Available

 

Datasheet





Customers who bought this item also bought:


Customer Reviews
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Fantastic SW CAN Transceiver!
Wednesday, 15 April 2015  |  Jay

Will keep this short and sweet. Works perfectly with an mbed LPC1768 and Vauxhall / GM single-wire CAN BUS (aka GMLAN). Still working months later!

Was this helpful to you?  Yes  /  No

4 of 4 people found this review helpful.

Free Technical Support
Fast Delivery Options
Customer Loyalty Scheme

Proto-PIC - UK Distributor of Sparkfun, Arduino, BBC Micro Bit, Adafruit Electronic ComponentsProto-PIC ; UK Distributor of Sparkfun, Arduino, Adafruit, BBC Micro Bit electrical components