Recently Viewed

exhi:bit Prototyping system for micro:bit

exhi:bit Prototyping system for micro:bit
  
Our Price:  £25.50(Inc. 20% VAT)(£21.25 Exc. VAT)Earn 25 Loyalty Points
+

SKU:  PPMB00101
Bar Code:  5055421084424
Part Number:  PPMB00101
Brand:  Proto-PIC
Platform:  BBC Micro:bit

Stock / Availability

Available Now:  

45 in stock, immediate despatch
Need more than we have? : Higher Quantities Available within 3-5 Working days
micro:pixel 4x8 WS2812B board for BBC micro:bitmicro:pixel 4x8 WS2812B board for BBC micro:bit
BBC Micro:bitBBC Micro:bit
Breadboard jumper wire packBreadboard jumper wire pack
Alligator Test Leads - Multicolored (10 Pack)Alligator Test Leads - Multicolored (10 Pack)
  (4 Reviews)

Although the micro:bit is a wonderful platform, the classroom management and
the workshop management of all the supporting accessories is a challenge.

That's why we created the exhi:bit - a prototyping and development system for the BBC micro:bit.

 

We wanted to create a system where a student could go from a prototype board to a finished, more permanent project seamlessly.
But importantly, we wanted to create a system where the main workhorse parts could be reused time and time again.

 

Exhi:bit has an edge connector socket which the micro:bit plugs into. As soon as the micro:bit is plugged in, you are ready to start creating.

 

 

Exhi:bit has all the micro:bit pins broken out to header connectors, for connection to plugin exhi:bit daughter boards and plugin classroom project boards, but also to generous pads on the edge of the board - so you can connect to your project with conductive thread, banana jacks or crocodile clips.

 

A generous prototyping area is provided for users who wish to create permanent projects, directly onto the exhi:bit or you can use a DIY Daughter board to easily swap projects

 

Or..

By using the supplied breadboard and adapter plate, temporary circuits are a breeze!

 

All of the circuits you create on your exhi:bit can be powered by using a 5-9V DC power supply (not included) or the micro USB port. The micro USB port isn't intended for programming the micro:bit - we just provided it as a convenient way to power the board. The on-board regulator ensures the voltage is micro:bit friendly.

 

How many times have you opened your drawer to find a board and had no idea what it was for? Three areas on the exhi:bit are provided for taking notes using a sharpie marker or similar, so you can keep track of which project is on which board - or which student has created the project.

 

   

 

A range of classroom project plug in modules for the exhi:bit will be released soon.

We've listened to some customer feedback and updated a couple of parts. Firstly we have changed the acrylic plate so it's just covering the prototyping area and included 3 nuts and screws to secure it in place. This is a far less delicate part and shouldn't be broken as easily while now letting you write on the notes section without removing the entire plate first. Secondly we've replaced the hard plastic standoffs with adhesive rubber feet, this should help keep the exhi:bit from sliding on your desk.

 

CAD Resources:

United Kingdom:

France:

United States of America:

Australia:


Customers who bought this item also bought:


Customer Reviews
Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
Microbit prototype board
Wednesday, 7 June 2017  |  David

Generally a well constructed board, let down by the fact that they put the breadboard at an angle on its plastic carrier. Would it be too much trouble to have a jig to ensure this is placed square? Every time I look at it the misalignment disturbs me. Other than that, it could merit 5 stars.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Makes things big and easy
Thursday, 5 January 2017  |  Colin

really helps with doing anything useful with the microbit, allows you to create complex circuits without all the faffing about

 

This review has not been appraised.


Rating:  
exhi:bit Prototyping System
Friday, 23 December 2016  |  John

I recently ordered the exhi:bit Prototyping System from Proto-Pic having previously seen a video demonstration of it on their website. It looked to be very well designed and it seemed particularly suited for the Education market, I intend personally to use it with my two grandsons who are in their primary years. When it arrived in the post, promptly as always from Proto-Pic, it was clear that a tremendous amount of thought had gone into designing this system. The perfect size of the base board has allowed the ideal amount of space for every terminal to be well separated and clearly labelled for its end users. It also includes a further panel at the bottom end which lists the terminals along with the lines and components to which they are connected on the BBC micro:bit. This makes it unnecessary to require a drawing of these connections to be at hand. Like the five larger terminals on the micro:bit, which are actually slightly larger on the exhi:bit, they enable connections to be made using crocodile clips or 4mm banana plugs to all of the lines on the micro:bit, including three each of the 3 volt and Ground lines.

I have personally handled and designed many printed circuit boards over four decades and I must say that the finished quality of the exhi:bit board equals the best I have seen. It is protected with a nicely shaped, clear acrylic sheet which also strengthens the PCB so that it will be robust in use. It is accompanied by a half-size plug-in breadboard which itself is mounted on a sheet of acrylic and fits very neatly onto the master board when in use. I tried out various circuits on this system with a micro:bit attached securely at the top end, running both Python and Block Editor programs to test it all out. Everything I tried worked exactly as I expected.

In addition to being powered by the micro:bit via its Micro USB connector there are two other ways in which the prototyping system can be powered. There is a standard 5mm DC connector which can run off a battery pack or Mains DC plug pack of 5 to 9 volts and also a further Micro USB socket with only its 5 volt and Ground lines in use, both of which I have tried. These connectors lead to an on-board DC voltage regulator to bring the supply down to 3 volts for safely connecting external components to the micro:bit via two each of 3 volt and ground pins conveniently placed adjacent to the top end of the breadboard. When using these external DC connectors the exhi:bit has a very useful on/off switch on the right hand side with an on-board micro LED to indicate when the external power is switched on. This LED is also illuminated when power is supplied to the BBC micro:bit via its USB lead connected to a computer.

It is clear that I am going to have a lot of fun experimenting utilizing the Proto-Pic exhi:bit both with my grandsons and on my own! Keep up the good work Proto-Pic!

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
well designed
Wednesday, 14 December 2016  |  Michael

This has clearly been a well thought out product which enables you to easily design external control circuits for the micro:bit. delivery was super quick too

 

This review has not been appraised.

Related Products
NEW
micro:pixel 4x8 WS2812B board for BBC micro:bit

micro:pixel 4x8 WS2812B board for BBC micro:bit£17.78

  (4)

Give your micro:bit a disco vibe with this WS2812B (also known as neopixels) add on board. Part of our range of micro:bit accessories and add ons.

BBC Micro:bit

BBC Micro:bit£12.98

  (6)

The BBC micro:bit, a pocket-sized codeable computer with motion detection, a built-in compass and Bluetooth technology

exhi:bit Pedestrian Crossing experiment board

exhi:bit Pedestrian Crossing experiment board£10.00

  (1)

This handy kit has everything you need to get a working Pedestrian crossing, Pre-built or DIY.

exhi:bit DIY Daughter board

exhi:bit DIY Daughter board£5.00

Make your micro:bit project permanent with this permanent breadboard for the exhi:bit prototyping system for micro:bit.

Breadboard jumper wire pack

Breadboard jumper wire pack£3.94

  (4)
Free Technical Support
Fast Delivery Options
Customer Loyalty Scheme

Proto-PIC - UK Distributor of Sparkfun, Arduino, BBC Micro Bit, Adafruit Electronic ComponentsProto-PIC ; UK Distributor of Sparkfun, Arduino, Adafruit, BBC Micro Bit electrical components