Do you want to try your hand at soldering or brush up on your soldering skills? Then why not try our lighthouse soldering kit? The PCB comes in 2 parts: the main PCB, where you solder the 11 components; and the base PCB, which slots into the bottom of the light house and with a couple of blobs of solder gives your lighthouse a strong and stable stand.
Once soldered this will emulate an Isophase lighthouse but fear not all you lovers of Occulting lighthouses by changing the value of the resistors you can change the flashing pattern.
Please note: We do not include a battery but you can add one above. Due to shipping regulations the only shipping method available if you do add one will be DPD as the Royal Mail DO NOT carry Lithium batteries and will destroy packages containing them.
What you will need:
- A soldering Iron, we recommend a variable temperature soldering station such as our Hakko FX-888D.
- Solder with flux core(s)
- Flush cutters
- Eye protection, flying legs can hurt!
- 1 x CR2032 Battery
Each Kit contains:
- 1 x 220 ohm resistor ( Red, Red, Black)
- 1 x 82k ohm resistor (Grey, Red, Orange)
- 2 x 220k ohm resistors (Red, Red, Yellow)
- 2 x 2N3904 NPN Tansistors
- 1 x Power switch
- 1 x CR2032 battery holder (battery not included)
- 2 x 10uF Capacitors
- 1 x Lighthouse PCB
- 1 x Stand PCB
- 1 x White LED
Want to know how this works : https://en.wikipedia.org/wiki/Multivibrator