The Pololu P-Star 25K50 Micro is a general-purpose programmable module based on Microchip’s PIC18F25K50 microcontroller, which has 32 KB of flash program memory, 2 KB of RAM, and built-in USB functionality. Onboard features of the P-Star (abbreviated P*) include a 16 MHz crystal, a USB Micro-B connector, and three user-controllable indicator LEDs. A voltage regulator and power selection circuit allow the board to be powered from either USB or an external 5.5 V to 15 V source, while a resettable PTC fuse on the USB VBUS supply and reverse protection on VIN help protect it from accidental damage. The board ships with a USB bootloader that makes it easy to program the PIC microcontroller without using an external programmer.
user’s guide provides the basics you need to get started with the P-Star 25K50 Micro as well as detailed technical information.
This product requires a
USB A to Micro-B cable (not included) to connect to a computer. Features Dimensions: 1″ × 0.6″ (1.05″ × 0.6″ including USB Micro-B connector) Programmable Microchip PIC18F25K50 microcontroller 32 KB flash (8 KB used by bootloader, leaving 24 KB available for user program by default) 2 KB SRAM 256 bytes of EEPROM Native full-speed USB (12 Mbps) 5 V logic voltage Internally clocked at 48 MHz, resulting in execution speeds up to 12 million instructions per second (MIPS) Precision 16 MHz crystal Many I/O lines in a small package 16 user I/O lines along the sides of the board 3 additional I/O pins available in other locations 13 pins can be configured as analog inputs 2 PWM output signals (one of which can be sent to four different pins) 5-bit digital-to-analog converter (DAC) output Three user-controllable LEDs USB Micro-B connector Can be powered from USB or external source regulated to 5 V by onboard regulator Operating voltage: 5.5 V to 15 V Can operate down to 3.8 V with decreased logic voltage Reverse-voltage protection on external power input PTC fuse on VBUS supply Ships with a proprietary USB bootloader developed by Pololu for the P-Star Bootloader is usable from Windows, Linux, and Mac OS X with open source software No external programmer required Compatible with standard Microchip compilers, development tools, and programmers Comprehensive user’s guide Pinout
This diagram identifies the I/O and power pins on the P-Star 25K50 Micro. The diagram is also available as a
printable PDF (161k pdf). For more information about the PIC18F25K50 microcontroller and its peripherals, see Microchip’s PIC18F25K50 documentation. Included hardware
Two 1×10-pin breakaway 0.1″ male headers and one 1×6-pin breakaway 0.1″ male header are included with the P-Star 25K50 Micro. These header pins can be soldered in to use the board with perfboards, breadboards, or 0.1″ female connectors.
Cant see the video?
Click Here to view on our YouTube Information channel