Recently Viewed
Polymer Lithium Ion Battery (3.7V, 1Ah)

Polymer Lithium Ion Battery (3.7V, 1Ah)

  (5 Reviews)
Our Price:  £7.80 

Available Now:  

No stock, discontinued

Part Number:  4652
Brand:  Proto-PIC

*PLEASE NOTE* - This item can no longer be shipped using standard mail. Royal Mail will now destroy all parcels containing LiPo Batteries*

*You must select Courier (DPD Services) shipping at checkout if this item is in  your basket. If standard mail/Royal Mail/or Royal Mail Special Delivery is chosen we will not ship this item and the order will be held for manual review- potentially delaying your order*

We apologise for any inconvenience this may cause.


These 3.7V Polymer Lithium Ion (LiPo) batteries provide a high power capacity in a very small lightweight package. This makes them ideal for many applications. They are often used in portable consumer products such as Bluetooth speakers and mobile phones.

The batteries are supplied with 100mm leads terminated with a standard 2 pin JST-PH connector.

These Polymer Lithium batteries come with a built in protection circuit which protects against; over voltage, over current, over discharge and also provides short circuit protection. When fully charged the battery will have a voltage of around 4.2V and when fully discharged the battery has a cut off voltage of 2.4V.

These batteries do not have a hard protective case. You should take care when housing the batteries in your design to ensure they have sufficient mechanical protection to protect the battery from any possible damage. If a battery does become damaged (dented, bent, etc) then it should not be used.

Lithium Polymer batteries require special charging circuits. Do not attempt to charge these with anything but a specialised Lithium Polymer charger.

Though these cells are rated for discharge rates of up to 2.1A, due to the connecting wire and connector used we do not recommend exceeding a discharge rate of more than 1A.


  • Built in protection circuit to prevent over charging or discharging.
  • Built in short circuit protection circuit.
  • Robust power source under extreme conditions (-10 to 60C).
  • JST-PH connector.


  • 1 x Polymer Lithium Ion Battery - 1000mAh.


  • Maximum Length: 34.5mm.
  • Maximum Width: 6.2mm.
  • Maximum Height: 52mm.
  • Cable Length: 100mm (nominal).

Please note - We have had batteries delivered marked 950mAH - This is an error on marking & the batteries are still 1000mAH.

Customers who bought this item also bought:

Customer Reviews
Average Rating (5 Reviews):  
Write a Review and share your opinions!

Perfect fit
Tuesday, 3 October 2017  |  Vaughan

Anyone who has the Minelab WM10 wireless module this battery fits perfectly

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Adafruit connector
Tuesday, 18 April 2017  |  Mark

Has the Adafruit connector for connecting to Powerboost 1000c, useful.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Came pre-charged. Nice!
Friday, 17 February 2017  |  Jeroen

Does what it says on the tin, nice and compact.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Tuesday, 29 November 2016  |  Andy

Perfect replacement battery for my Fiio E7 DAC/headphone amp.

Was this helpful to you?  Yes  /  No

1 of 2 people found this review helpful.

Good build quality
Tuesday, 8 September 2015  |  Oskar

Good build and works like a charm!


2 of 2 people found this review helpful.