Pololu

Qik 2s9v1 Dual Serial Motor Controller

(No reviews yet) Write a Review
SKU:
PPPOL1110
  • Qik 2s9v1 Dual Serial Motor Controller
  • Qik 2s9v1 Dual Serial Motor Controller
  • Qik 2s9v1 Dual Serial Motor Controller
£19.96

Description

Qik 2s9v1 Dual Serial Motor Controller - Pololu 1110 Discontinued


This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial interface, making it easy to add motors to your microcontroller- or computer-based project. The motor supply voltage range is 4.5 to 13.5 V; the continuous current per channel is up to 1 A (3 A peak). The logic supply can be as low as 2.7 V, allowing operation with modern microcontrollers running at 3.3 V.
The qik 2s9v1 is Pololu’s second-generation dual serial motor controller. The compact module allows any microcontroller or computer with a serial port (external RS-232 level converter required) or USB-to-serial adapter to easily drive two small, brushed DC motors with full direction and speed control. It provides ultrasonic, 8-bit PWM speed control via an advanced, two-way serial protocol that features automatic baud rate detection up to 38.4 kbps and optional CRC error checking. Two status LEDs give visual feedback about the serial connection and any encountered error conditions, making debugging easy, and a demo mode allows easy verification of proper operation.
The improvements over the previous generation and competing products include:

  • high-frequency (ultrasonic) PWM to eliminate switching-induced motor shaft hum or whine
  • a robust, high-speed communication protocol with user-configurable error condition response
  • visible LEDs and a demo mode to help troubleshoot problematic installations
  • reverse power protection on the motor supply (not on the logic supply)

For a more advanced, higher-power version of this controller, please consider the qik 2s12v10. For a simpler carrier of the qik’s motor driver, please consider the TB6612FNG dual motor driver carrier, and for a robot controller based on the qik’s driver, please consider the Baby Orangutan and Orangutan SV-328 robot controllers and 3pi robot, which connect the TB6612 to a user-programmable AVR microcontroller.

November 27, 2013 update: We have changed this product by replacing the large, silver electrolytic capacitor with a much smaller ceramic capacitor. This lowers the profile of the board but does not affect functionality at all. The main product picture shows this new version; the rest of the pictures on this product page still show the previous version with the tall electrolytic capacitor.

 

Main Features of the Qik 2s9v1

2s9v1 Dual Serial Motor Controller connections guide

  • Simple bidirectional control of two DC brush motors.
  • 4.5 V to 13.5 V motor supply range.
  • 1 A maximum continuous current per motor (3 A peak).
  • 2.7 V to 5.5 V logic supply range.
  • Logic-level, non-inverted, two-way serial control for easy connection to microcontrollers or robot controllers.
  • Optional automatic baud rate detection.
  • Two on-board indicator LEDs (status/heartbeat and serial error indicator) for debugging and feedback.
  • Serial error output to make it easier for the main controller to recover from a serial error condition.
  • Jumper-enabled demo mode allows initial testing without any programming.
  • Optional CRC error detection eliminates serial errors caused by noise or software faults.
  • Optional motor shutdown on serial error or timeout for additional safety.
  • Supports daisy-chaining the qik to other qiks and Pololu serial motor and servo controllers, allowing the control of up to hundreds of motors and servos with a single serial line.
  • Comprehensive user’s guide.

Motor Controller Dimensions:

  • Size: 17.8 x 30.5 x 7.1 mm (0.7" x 1.2" x 0.28")
  • Weight: 2.0 g

Dimensions for the 2s9v1 motor controller

Motor Controller Specifications:

 

Motor channels: 2
Motor supply voltage: 4.5 – 13.5 V
Continuous output current per channel: 1 A
Peak output current per channel: 3 A
Auto-detect baud rate range: 1200 – 38400 bps
Fixed baud rate: 38400 bps
Available PWM frequencies: 31.5 kHz, 15.7 kHz, 7.8 kHz, 3.9 kHz
Logic supply voltage: 2.7 – 5.5 V
Logic supply current: < 15 mA
Reverse voltage protection?: Y (on motor supply only)
Motor driver: TB6612FNG

 

Included Hardware:


The qik 2s9v1 comes with:

  • One 16x1 straight male header strip (0.1")
  • One 12x1 right-angled male header strip (0.1")
  • Two red shorting blocks

qik dual serial motor controller with header strips and shorting blocks


This hardware offers some added flexibility in how you can integrate the qik into a circuit of your design.

Sample Code


There is also a basic Arduino library for the qik dual serial motor controllers written by Pololu that simplifies the interfacing of the Qik 2s9v1 dual serial motor controller with an Arduino. The library handles the details of serial communication with the qik, allowing two brushed DC motors to be controlled easily.

Documents:

View AllClose

Additional Information

Brand:
Pololu
Part Number:
1110
Barcode:
5055421083229
View AllClose