Relay Shield v3.0 – 4 Channel
£17.94 inc VAT (£14.95 ex VAT)
3 in stock (can be backordered)
Brand: Seeed Studio
Part Number: 103030009
Relay Shield V3.0
This Relay Shield provides four high quality relay that can control high current loads to Arduino / Seeeduino boards. It also provides NO (Normally Open) / NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by Arduino’s Digital I/Os. Standardized shield form factor enables smooth connection with Arduino and compatibles. The shield also has four LED indicators to show the on/off state of each relay.
Relays are useful in switching on/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc…
Note: Exercise caution when dealing with AC. Get help from certified electrician.
Arduino/Seeeduino Shield compatible
Relay screw terminals
Working status indicators for each relay
High quality relays
Provides NO/NC interfaces
COM1 – Common pin
NC1 – Normally Closed. Will be connected with COM1 when RELAY1 pin is set low and disconnected when RELAY1 is high;
NO1 – Normally Open. Will be connected with COM1 when ŸRELAY 1 pin is set high and disconnected when RELAY1 is low;
4 DIGITAL PINS TO CONTROL 4 ŸRELAYS
RELAY1-RELAY4 pins could be connected directly with Arduino pin number of 7-4, so that four relays could be easily controlled by the Arduino
|Dimensions||100mm x67mm x30mm|
|Operating Current:||8~250 mA|
|Relay Life:||100,000 Cycle|
|ESD contact discharge:||±4KV|
- Site Map
- About Proto-PIC
- Contact Proto-PIC
Address: Unit 17 Kirkcaldy Enterprise Centre, Myregormie Place, Mitchelston Ind Est, Kirkcaldy, Fife, Scotland, KY1 3PF, UK.
Copyright © 2020 Proto-PIC Electronic Components, RelChron Ltd. All Rights Reserved. Company Reg No. SC298119.